How To Repair A Tear In Vinyl Awning

A hole in your siding ways an opportunity for moisture, insects, and more. Luckily, if you have a hole in your vinyl siding, it'south commonly like shooting fish in a barrel to fix without the need for a professional. Here, our vinyl siding experts explicate how to repair a hole in vinyl siding:

What you lot'll need to repair a hole in vinyl siding:

Siding Cleaner
Rag
Vinyl Siding Caulk (in the color of your siding)
Caulk Gun
Caulk Trimmer
Scrap Siding
Utility Knife or Shears

A Puncture

If you simply have a small puncture in your vinyl siding, repair is easy.

Use siding cleaner to clean the surface area around the puncture.
Wipe the area dry with a rag.
Cut the tip of your colour-lucifer vinyl siding caulk and fit the tube into your caulk gun.
Squeeze the caulk into the puncture to fill up the space backside the hole.
Overfill the hole slightly, then utilize your caulk trimmer to scrape off the excess caulk.

A Hole/Tear

A hole or tear in your siding requires a little more than effort to repair.

Use siding cleaner to clean the surface area around the hole.
Wipe the area dry with a rag.
Use your utility pocketknife or shears to cut a bit piece of siding several inches longer than the opening.
Cut the top and bottom edges and then you're left with a apartment piece of siding that curves on the meridian and bottom.
Place the slice over the pigsty to make sure it fits and curves correctly. If it doesn't, go on to trim the edges until it does.
Cut the tip of your color-match vinyl siding caulk and fit the tube into your caulk gun.
Apply a generous amount of caulk to the dorsum side of your chip slice of siding and run a dewdrop of caulk around the pigsty opening.
Place the siding slice over the hole and printing firmly to seal.
Let dry out, then use a utility pocketknife to cut away any backlog caulk.

*Photo courtesy of askshell.com